Stone cutting machine is a mechanical equipment commonly used for cutting stone. It usually consists of components such as an electric motor, cutting disc, and base. The cutting disc is typically made of materials such as steel, diamond, and others, and different cutting discs can be selected based on different requirements.To replace the blade:
Turn off the power: Before replacing the blade, turn off the power of the stone cutting machine and conduct a safety check.
Remove the blade: Loosen the blade fixing nut with a wrench or wrench set. Then, remove the nut, cutting blade, and sealing pad together and place them in a safe place.
Clean: Clean all surfaces on the blade shaft to ensure they are clean and dust-free. Spray with oil-free gas and then wipe with a cleaning cloth.
Install a new blade: Slide the new stone cutting blade onto the shaft and connect the sealing pad and nut to the blade in the original assembly order.
Secure the blade: Tighten the blade fixing nut with a wrench or wrench set. Ensure that the nut is tightened to the correct torque to avoid damaging the blade or equipment.
Test: Before reconnecting the power, conduct a test to ensure that the equipment works properly. Turn on the equipment and let the blade idle for a few minutes to ensure that the cutting blade will not loosen or have other issues.
The above are the steps to replace the blade of a stone cutting machine. Please note that when replacing the blade, you should be extra careful and consider safety issues to avoid accidents. If you lack related skills or experience, please seek help from a professional technician.
